VST Chemical Corp.
P.O. Box 510
Yulan, NY 12792
800-241-7428
ANTI SKID EPOXY SAFETY SURFACE KIT
FEATURES:
DESCRIPTION:
Recommendations and Limitations, The Epoxy Type Concrete Patch and Repair Kit has been designed for use on floor areas which are subjected to abrasive traffic, impact and corrosive chemical spillage, such as alkalis, blood, fats, oil, salts, sugars, and many other chemicals . Do Not Use Epoxy Repair Kit to wood or asphalt materials. This kit may be installed on any structurally sound and properly prepared concrete, metal or ceramic tile surface.
DIRECTIONS;
Before you start, read the application instructions completely. Make sure surface has been properly prepared Make sure temperature of floor and material is between 60 and 85 degrees F. The floor must be dry and free of all oils, grease, wax and dirt. Acid etch all bonding surface.
. Sweep clean all areas to be repaired.
. Use appropriate cleaner to remove grease and other contaminants.
. Let area dry well
. See A&B cans for mixing instructions
. Apply to areas with trowel of brush and smooth over surface.
. While surface is wet, sprinkle non-skid grit on the desired non-skid area.
. Curing time minimum 12 hours, 24 hours for traffic and 48 hours for chemical spillage.
Packaging:
By the Kit
(click here to make this page full screen for bookmarking or printing)
VST Chemical Corp
P.O. Box 510
Yulan, NY 12792
Phone: 1-800-241-7428
Fax: 1-845-557-0596
E-mail:chemicals@ecki.com
All contents Copyright © 1997-2008, VST Chemical Corp. All Rights Reserved. This material may not be reproduced in any form without permission.