VST Chemical Corp.
P.O. Box 510
Yulan, NY 12792
800-241-7428
CHOKE & CARB CLEANER
FEATURES:
1. Choke and Carburetor Cleaner
2. Cleans and Frees Carburetor Linkages
3. " " " Heat Risers
4. " " " PCV Systems
5. " " " Floats
6. " " " Springs
7. " " " Automatic Choke Adjustments
DESCRIPTION:
An ultra high volatility formulation that dissolves carburetor deposits and fuel system contaminants such as gum, sludge and varnish. Helps improve fuel system performance and insure maximum fuel economy. Will not harm Oxygen Sensors or Catalytic Converters.
DIRECTIONS:
Carburetor and Linkage: With ignition off and engine cool, remove air filter cleaner and spray entire exterior surface of carburetor including linkage, springs and housing. After carburetor dries, start engine and spray product down the carburetor throat to remove the deposits from the lower throttle area. Automatic Chokes: With engine off, spray cleaner on both ends of the choke valve and corresponding linkages while opening and closing choke by hand. Manifold Heat Control Valve: With engine cold spray choke and carb cleaner on both ends of heat control value shaft. Move counterweight up and down until valve moves freely. If necessary tap gently with a light hammer to loosen frozen heat control valve. PCV Valve: Disconnect crank case side of PCV valve and with engine running spray product into open end of valve while working the plunger back and forth.
Packaging:
12 aerosol cans per case
(click here to make this page full screen for bookmarking or printing)
VST Chemical Corp
P.O. Box 510
Yulan, NY 12792
Phone: 1-800-241-7428
Fax: 1-845-557-0596
E-mail:chemicals@ecki.com
All contents Copyright © 1997-2008, VST Chemical Corp. All Rights Reserved. This material may not be reproduced in any form without permission.