VST Chemical Corp.
P.O. Box 510
Yulan, NY 12792
800-241-7428
STAINLESS STEEL COATING (Aerosol)
FEATURES:
1. Long Lasting
2. Chemical Resistant
3. Heat Resistant up to +900 degrees F
4. Provides Unmatched Rust Protection
5. Seals Surface Against Corrosion
6. Dries in Fifteen Minutes
7. Hardens Overnight
8. Cures to Optimum Strength After Several Days
9. Will Not Darken or Oxidize
DESCRIPTION:
A super tough coating containing pure stainless steel pigment in an ultra durable epoxy ester resin. Protects metal, wood, ceramics and leather from deterioration caused by harsh chemicals, severe weather or abrasions. Adds esthetic appeal to any surface to which it is applied.
. Applications: Radiators, Steam Pipes, Fire Hydrants, Exhausts, Mufflers, Parking Meters, Chain and Wire Fences, Boilers, Engines, Water Lines, Grills, Lockers, Heat Exchangers, Ovens, Storage and Mixing Tanks, Chemical Processing and Production Equipment, Vehicle Maintenance, HVAC Trades, Marine, Agricultural and Military Equipment, Road Equipment, Oil Drilling Equipment, Aircraft Maintenance, Restaurant Equipment.
DIRECTIONS:
Before application, surface must be clean, dry and free from grease, oil, wax, and loose rust scale and paint. Shake can vigorously before application. Shake can until agitator ball rattles freely for at least 60 seconds.
. Hold can 6 to 8 inches from surface and spray in a sweeping motion to insure a uniform coating. Several thin coats will produce better results than one thick coat. If needed, allow each application 10 to 15 minutes to dry before applying subsequent coats.
Packaging:
12 aerosol cans per case
(click here to make this page full screen for bookmarking or printing)
VST Chemical Corp
P.O. Box 510
Yulan, NY 12792
Phone: 1-800-241-7428
Fax: 1-845-557-0596
E-mail:chemicals@ecki.com
All contents Copyright © 1997-2008, VST Chemical Corp. All Rights Reserved. This material may not be reproduced in any form without permission.