VST Chemical Corp.
P.O. Box 510
Yulan, NY 12792
800-241-7428
SEIZE COMBATANT- ANTI SEIZE COMPOUND2
FEATURES:
1. Hi-Temp Anti-Seize Compound
2. Prevents Seizing, Galling, Pitting
3. Non-Chlorinated
4. Will not Harden or Fuse to Metals
5. Effective at Temperatures up to +2100 degrees F
DESCRIPTION:
An anti seize compound which prevents galling, seizing, pitting, fretting, corrosion and distortion of threaded, keyed, splined and press fitted parts and assemblies. Protects surfaces from fusing at sustained temperatures up to 2100 degrees F. Highly resistant to moisture, harsh weather, chemical fumes, salt spray and steam. Allows for tighter, more vibration proof seals. Enables easier disassembly by reducing torque requirements and providing semi-permanent lubrication.
DIRECTIONS:
Pre-clean surfaces to be treated, removing any dirt, grit or old grease. Shake can thoroughly until mixing ball rattles freely for at least 30 seconds. With can held in upright position, spray surface in short bursts from a distance of 8 to 10 inches. After use, invert can and clear actuator by spraying until only gas is dispelled.
Packaging:
12 aerosol cans per case
(click here to make this page full screen for bookmarking or printing)
VST Chemical Corp
P.O. Box 510
Yulan, NY 12792
Phone: 1-800-241-7428
Fax: 1-845-557-0596
E-mail:chemicals@ecki.com
All contents Copyright © 1997-2008, VST Chemical Corp. All Rights Reserved. This material may not be reproduced in any form without permission.