VST Chemical Corp.
P.O. Box 510
Yulan, NY 12792
800-241-7428
DRY MOLY LUBRICANT
FEATURES:
DESCRIPTION:
An extreme conditions lubricant and anti-seize coating that withstands temperature ranges from -110 degrees F to +1050 degrees F. Resists pressures up to 100,000 psi. Dry film coating will not attract dirt or dust. Inert to water, oil, alkalis and many acids. Contains pure Molybdenum Disulfide micro-particles which burnish themselves into metal surfaces and provide a bonded dry lubricating film.
Industrial Uses: Foundries, Automotive Plants, Vehicle Maintenance, Sewing Trades, Paper and Corrugated Converting, Chemical Plants, Woodworking, Marine, Agricultural & Military Equipment, Road Equipment, Oil Drilling Equipment, Aircraft Maintenance, Steel Mills and Mining Operations.
DIRECTIONS:
Shake can vigorously before application. Surface must be free from loose rust oil, grease and old paint. Hold can 8 to 10 inches from surface and spray in a sweeping motion to insure a thin uniform coating. Allow first application 3 to 5 minutes before applying second coat.
. Important: To prevent clogging, after each use, invert can and spray a few short bursts to clear valve.
Packaging:
12 aerosol cans per case
(click here to make this page full screen for bookmarking or printing)
VST Chemical Corp
P.O. Box 510
Yulan, NY 12792
Phone: 1-800-241-7428
Fax: 1-845-557-0596
E-mail:chemicals@ecki.com
All contents Copyright © 1997-2008, VST Chemical Corp. All Rights Reserved. This material may not be reproduced in any form without permission.