VST Chemical Corp.
P.O. Box 510
Yulan, NY 12792
800-241-7428
COLD ZINC GALVANIZE COATING
FEATURES:
DESCRIPTION:
High solids, pure zinc coating that electrically bonds itself to metal surfaces. Equals protection provided by hot dip galvanizing methods. Resists corrosion and rust migration. Provides a tough, durable gray surface. Can be used as a primer prior to painting. Protects surfaces from salt water and chemical fume corrosion. Convenient aerosol is perfect for touch up of cold dipped parts.
For Use On: Structural steel and wire tanks, piping, ducts, trucks, auto bodies, trailers, signs, fans, boats, docks, oil rigs, dairy equipment, fencing, gutters, ornamental and antique metals, air conditioning units, farm and road equipment.
DIRECTIONS:
Shake can vigorously before and during use. Shake can vigorously until agitator ball begins to rattle. Continue shaking for t least one minute after to ensure that all the zinc is in suspension. Surface must be free from all loose rust, oil, grease and old paint. Spray with a sweeping motion holding can no closer than 10 inches from surface. Coating should be touch dry in 15 minutes. May be painted over after allowing approximately six hours to dry. Cures in 24 to 48 hours. Several thin coats are better than one heavy coat.
Also available in 5 gallon pails.
. Important: To prevent clogging. After each use, invert can and spray a few short bursts to clear valve.
Packaging:
minimum order 1 case, 12 cans per case
12 aerosol cans per case
Also available in 5 gallon pails
(click here to make this page full screen for bookmarking or printing)
VST Chemical Corp
P.O. Box 510
Yulan, NY 12792
Phone: 1-800-241-7428
Fax: 1-845-557-0596
E-mail:chemicals@ecki.com
All contents Copyright © 1997-2008, VST Chemical Corp. All Rights Reserved. This material may not be reproduced in any form without permission.