VST Chemical Corp.
P.O. Box 510
Yulan, NY 12792
800-241-7428
AMMONIATED SYNTHETIC STRIPPER
FEATURES:
DESCRIPTION:
This synthetic stripper for removing wax and metal interlocked acrylic finishes. It provides superior results on all types of floors and is capable or removing extra-heavy build-ups. The quick acting stripper will emulsify and dissolve away wax film for easy rinsing.
DIRECTIONS:
The stripper may be used as is or diluted with water as needed. If dilution is desired; test a 1:4 dilution in a small area and adjust the dilution to create the right stripper. When diluting use hot water. Apply solution liberally to floor with a mop. Make sure that the surface is uniformly wet. Allow stripper to soak in for 3 to 5 minutes. Do not allow stripper to dry. Thoroughly pick up all of the solution with a clean mop, wet vac or if available an automatic scrubber. Allow to dry. Floor may be buffed to enhance the look of the floor before accepting the first coat of floor seal or finish. Rinsing is recommended but not necessary.
Note: This stripper should not be used on wood floors or painted surfaces. May soften or bleach linoleum or rubber floors.
Packaging:
4x1 single Gallons per case
6x1 single gallons per case
5 gallon pails
6 gallon pails
30 gallon drum
55 gallon drum
(click here to make this page full screen for bookmarking or printing)
VST Chemical Corp
P.O. Box 510
Yulan, NY 12792
Phone: 1-800-241-7428
Fax: 1-845-557-0596
E-mail:chemicals@ecki.com
All contents Copyright © 1997-2008, VST Chemical Corp. All Rights Reserved. This material may not be reproduced in any form without permission.