VST Chemical Corp.
P.O. Box 510
Yulan, NY 12792
800-241-7428

ACRYTHANE SEALER

FEATURES:

1. Water Based Acrylic
2. Polymer Seal
3. Urethane Fortifies
4. Added Durability
5. Especially Effective on Concrete Marble, Terrazzo, Brick, Quarry, Ceramic Tile and Slate
6. Coverage 1100-1500 sq ft

DESCRIPTION:

This product offers benefits of acrylic polymers and urethanes. Unlike Oil modified urethanes this product is not combustible and does not have the pollution problems of the oil modified coatings. This product is made to be scrubbed clean on a daily or weekly basis. This is ideal because it is easily patchable for areas of wear.

DIRECTIONS:

Use a clean cotton or rayon mop or applicator. No etching is required of concrete. However, floor surface should be thoroughly cleaned of any grease, oil, did, etc. May be applied over previously sealed concrete.

. Apply two or three thin coats of product allowing approximately thirty minutes between coats of sealer.

Packaging:

Minimum order 1 gallon

4x1 single Gallons per case

6x1 single gallons per case

5 gallon pails

6 gallon pails

30 gallon drum

55 gallon drum

(click here to make this page full screen for bookmarking or printing)

Home Page

VST Chemical Corp
P.O. Box 510
Yulan, NY 12792
Phone: 1-800-241-7428
Fax: 1-845-557-0596
E-mail:chemicals@ecki.com

All contents Copyright © 1997-2008, VST Chemical Corp. All Rights Reserved. This material may not be reproduced in any form without permission.