SPEED STRIPPER

VST Chemical Corp.
P.O. Box 510
Yulan, NY 12792
800-241-7428

CLICK HERE TO GET A PRICE QUOTE TODAY!

SPEED STRIPPER

FEATURES:

Wax & Finish Remover
Liquefies The Toughest Finishes
No Rinsing Required
Eliminates Use of Floor Machines And Stripping Pads.
Removes All Metal Interlocked Floor Finishes and Waxes
Labor Saver,
Mop On - Mop Off
Non Ammoniated
No Floor Machine Scrubbing
Mimimum Order 1 gallon

DESCRIPTION:

This stripper is a new blend of solvents designed to liquefy finishes and waxes without the use of floor machine agitation, rinsing, or neutralizing before recoating with floor finish. It's deep penetrating quality allows you to strip floors in considerably less time compared to conventional strippers.

Note: This stripper should not be used on wood floors or painted surfaces. May soften or bleach linoleum or rubber floors.

DIRECTIONS:

The stripper may be used as is or diluted with water. Dilute with water as needed. If dilution is desired; test a 1:4 dilution in a small area and adjust the dilution to create the right stripper. When diluting use hot water.

. Apply solution liberally to floor with a mop. Make sure that the surface is uniformly wet.

. Allow stripper to soak in for 3 to 5 minutes. Do not allow stripper to dry. Thoroughly pick up all of the solution with a clean mop, wet vac or if avoidable an automatic scrubber.

. Allow to dry. Floor may be buffed to enhance the look of the floor before accepting the firstr coat of floor seal or finish.

. Rinsing is recommended but not necessary.

Packaging:

Mimimum Order 1 gallon

4x1 single Gallons per case

6x1 single gallons per case

5 gallon pails

6 gallon pails

30 gallon drum

55 gallon drum

(click here to make this page full screen for bookmarking or printing)

Home Page

VST Chemical Corp
P.O. Box 510
Yulan, NY 12792
Phone: 1-800-241-7428
Fax: 1-845-557-0596
E-mail:chemicals@ecki.com