VST Chemical Corp.
P.O. Box 510
Yulan, NY 12792
800-241-7428

CLICK HERE TO GET A PRICE QUOTE TODAY!

(BACK TO HOME PAGE)

 

SOLUBLE CUTTING OIL

FEATURES:

  1. Petroleum Base Coolant For All Metal Working Applications
  2. Water, Mix Cutting and Grinding Fluids
  3. For Ferrous and Non-Ferrous Metal Working
  4. Good Emulsion Stability
  5. Rust Preventive and Lubrication Properties
  6. For Industrial Use Only

DESCRIPTION:

This product mixes readily with water to form stable emulsions and has good rust-preventative properties. It is inhibited against foaming. This product is suitable for a wide rage of metal cutting and grinding operations. It will effectively remove heat from the work piece and can be applied as a stream, or in mist form.

. This product is a premium quality soluble oil with a higher concentration of emulsifier for outstanding emulsion stability. This feature gives extra protection against oil-water separation under adverse conditions such as poor water quality or contamination of the emulsion with dirt or trampoil. In addition it contains a bactericide to provide initial resistance to the formations of objectionable odors.

DIRECTIONS:

The soluble oil is a general purpose grade for all the ordinary cutting and grinding operations for which soluble oil is normally used. Mixed with water, it forms a milky-white emulsion that does not gum machined surfaces. Recommended water-oil dilution ratios are 10:1 up to 20:1 forming, boring, and turning, and 40:1 to 80:1 for grinding.

. Cleaning And Rust Prevention: Manufactured parts can be cleaned and protected against rusting by immersing them in an emulsion of diluted about 10:1. The bath should be held at 66-80 degrees. Celsius and agitation should be provided for the pad which remaining in the bath until they reach its temperature. After removal, the pads dry quickly, protected for limited storage periods by a this protective film. With irregular-shaped parts, pools of trapped emulsion must be empties to permit complete drying.

Packaging:

minimum order 1 gallon

4x1 single Gallons per case

6x1 single gallons per case

5 gallon pails

6 gallon pails

30 gallon drum

55 gallon drum

(click here to make this page full screen for bookmarking or printing)

Home Page

VST Chemical Corp
P.O. Box 510
Yulan, NY 12792
Phone: 1-800-241-7428
Fax: 1-845-557-0596
E-mail:chemicals@ecki.com

All contents Copyright © 1997-2008, VST Chemical Corp. All Rights Reserved. This material may not be reproduced in any form without permission.