VST Chemical Corp.
P.O. Box 510
Yulan, NY 12792
800-241-7428
52% HI SOLIDS POLYURETHANE
FEATURES:
DESCRIPTION:
This polyurethane coating is a high solids formula with drying agents and solvents to give excellent results when used on concrete, wood, cement and other hard floors. This forms an effective barrier against chemical attacks and moisture penetrations. This finish is a complete treatment that absorbs to seal and finish floors in one step.
. This product will give a smooth, durable, high gloss finish. This product will not show overlaps so floors can be patched when necessary.
. Coverage is approximately 400 sq. ft. for the first coat, 600 sq. ft. for second coat. Approximate drying time at 60 degrees F. is 6-8 hours. Dry time will change depending on humidity and temperature
DIRECTIONS:
Clean the surface thoroughly with a good cleaner.
. Agitate the surface with a stiff brush.
. Allow the surface to dry thoroughly prior to applying the sealer.
. Apply with a paint roller, lamb's wool applicator, or brush.
. Special Notations : If very fine finish is desired on wood floors, we advise No., 3 steel wooling of the first coat. When completing the job, close the container tightly to prevent evaporation from taking place. Do not apply on a hot or muggy day.
Packaging:
Minimum order 1 gallon
4x1 single Gallons per case
6x1 single gallons per case
5 gallon pails
6 gallon pails
30 gallon drum
55 gallon drum
(click here to make this page full screen for bookmarking or printing)
VST Chemical Corp
P.O. Box 510
Yulan, NY 12792
Phone: 1-800-241-7428
Fax: 1-845-557-0596
E-mail:chemicals@ecki.com
All contents Copyright © 1997-2008, VST Chemical Corp. All Rights Reserved. This material may not be reproduced in any form without permission.