VST Chemical Corp.
P.O. Box 510
Yulan, NY 12792
800-241-7428
FORM OIL
FEATURES:
DESCRIPTION:
AR Form Release Oil is a concentrated form release oil that is also an ideal product for use in pri-cast and on-site operations. It can be safely used on a wide variety of surfaces including structural members, buildings, foundations, septic tank, etc.
DIRECTIONS:
Brush or spray on forms to coat surface evenly. Product will prevent concrete from adhering to forms.
. This product may be diluted a minimum of 4 to 1 with fuel oil or equivalent before use.
. For use in a casting applications in which taper allows relatively easy removal from 4 to one to 8 to 1.
. Used in transport equipment and transport to prevent adhesion and allow easy cleanup without hazardous acid. 4 to 1 dilution.
. New metal forms should be treated prior to first use with Form Release Oil, to replace oils driven out of the metal during manufacturing process.
. Spray metal forms to prevent rust pitting and corrosion if they are to be stored for a period of time.
Packaging:
minimum order 1 gallon
4x1 single Gallons per case
6x1 single gallons per case
5 gallon pails
6 gallon pails
30 gallon drum
55 gallon drum
(click here to make this page full screen for bookmarking or printing)
VST Chemical Corp
P.O. Box 510
Yulan, NY 12792
Phone: 1-800-241-7428
Fax: 1-845-557-0596
E-mail:chemicals@ecki.com
All contents Copyright © 1997-2008, VST Chemical Corp. All Rights Reserved. This material may not be reproduced in any form without permission.